NOTICE: A price increase will be effective on January 1, 2023. See Price page for information.

Need Help? (877) RELTEKiT

 

Home » Product Selection Guide
Product Selection Guide

RELTEK supports your growth with leading edge technology in coatings, sealants and adhesive systems for harsh environments, bonding dissimilar materials and difficult to bond substrates. Our products are simple to use and equally simple to select. 

Select a product category, then choose the listed product best suited for your application.

Test & Splice Kits Adhesives  Potting Coatings Sealants Adhesive promoters

 

Test & Splice Kits

These factory Tech Kits, PTFE Bonding Kits, Cable Splice kits, and Sample kits are the best way to test our products before committing to production level quantities. They include all the tools you need plus comprehensive application and safety instructions.

Electrical Splice Kits -
P301-X
P302-X

PTFE Bonding Kit

Tech Kit with 1 epoxy & 1 primer

Deluxe Tech Kit with 2 epoxies & 1 primer

Introductory Sample Kit
Adhesives

Our two part epoxy adhesives are able to bond the most difficult substrates under extremely harsh environmental conditions They are particularly effective against moisture, salt water, acids, alkalis, oil, gasoline and detergents.

B-536 - Outstanding semi rigid two part epoxy adhesive for very high strength and fast assembly applications. Good for electronics applications. High moisture resistance.

 

B-481TH – Semi rigid thixotropic two part epoxy. Bonds difficult to bond substrates and dissimilar materials. It provides exceptional performance as a universal adhesive, sealant and conformal coating.

 

B-575 - Very high strength adhesive with high moisture resistance for bonding most plastics metals, glass and ceramics.

 

B-45TH - This thixotropic (TH)version of the B45 adhesive has a higher viscosity, allowing better gravitational flow in hard to reach areas.

 

B-482TH - This thixotropic(TH) version of the B482 adhesive has a higher viscosity, allowing better gravitational flow in hard to reach areas.

 

B-4811 - High chemical resistance and strength. Outstanding moisture resistance and ruggedness .Superior for coating, priming and encapsulation in marine applications.

 

B-4682TH - Adhesive for bonding UHMW, HDPE, PTFE and other dissimilar plastics. Highly flexible for potting and protecting electronic components from mechanical and thermal shock.

 

Special order products (additional costs, and longer lead times may apply):

B-45CC - Caulks and seals difficult to bond substrates and dissimilar adhesions to UHMW and acetal (Delrin).Superb in harsh chemical, marine and sub- sea environments. Cures under water.

B-521 - Excellent for fast assembly of dissimilar materials with large differentials in thermal expansions like glass to acrylic. Bonds most plastics ,metals, and ceramics.

B-755 - Optically clear, high strength and temperatures (600 degrees F) low viscosity for adhesion, coating and potting applications. Excellent for water, fuels and oil sealing.

B-536TH - Thixotropic (TH) epoxy for bonding most plastics, metals, glass and ceramics. High moisture resistance. Full ambient cure within 10 minutes or 15 seconds with applied heat.
Potting

These coatings can be used in conjunction with many polymers for improved chemical, impact and environmental resistance in the most extreme environments.

B-482 - Semi flexible epoxy suitable for encapsulating sensitive instrumentation. Superior for coating in marine applications and other harsh environments.

 

B-45 - is a two part adhesive, flexible to 130% elongation. Tough and chemically resistant, bonds to most plastics and is excellent for electrical and electronic application.

 

B-46 - Very high flexibility, 400% elongation with high tack for un-abraded substrates and plastic films including unetched PTFE, such as TEFLONTM  [Teflon is a registered trademark of the Chemours company (DuPont)], excellent water and oil block for cables.

 

B-4682 - High flexibility, 250% elongation. Excellent adhesion to low surface energy plastics without primer or surface preparation. Can be applied to oily surfaces.

 

B-481 - Tough and high strength up to 6000psi excellent for autoclave applications,suitable for direct contact with semiconductors. Bonds to most substrates.

 

B-4811 - High chemical resistance and strength. Outstanding moisture resistance and ruggedness .Superior for coating, priming and encapsulation in marine applications.

 

B-536 - Outstanding semi rigid two part epoxy adhesive for very high strength and fast assembly applications . Good for electronics applications. High moisture resistance.

 

B-575 - Very high strength adhesive with high moisture resistance for bonding most plastics metals, glass and ceramics.

 

B-52 - Outstanding adhesive semi flexible 2 part epoxy. Provides fast assembly of dissimilar materials such as glass to acrylic. It has a fast thermal cure and long pot life.

 

B-46TH - 2 part primerless highly flexible adhesive for use on untreated dissimilar surfaces. Exhibits superior chemical resistance for submersion in oils and acid bases.

Special order products (additional costs, and longer lead times may apply):

B-755 - Optically clear, high strength and temperatures (600 degrees F) low viscosity for adhesion, coating and potting applications. Excellent for water, fuels and oil sealing.



Back To Top
Coatings

These potting compounds are an effective way to encapsulate parts and protect sensitive electronics from environmental factors such as high temperature, humidity and chemicals. They posses excellent dielectric properties.

B-45 - is a two part adhesive, flexible to 130% elongation. Tough and chemically resistant, bonds to most plastics and is excellent for electrical and electronic application.

 

B-4811 - High chemical resistance and strength. Outstanding moisture resistance and ruggedness .Superior for coating, priming and encapsulation in marine applications.

 

B-482 - Semi flexible epoxy suitable for encapsulating sensitive instrumentation. Superior for coating in marine applications and other harsh environments.

 

B-481 - Tough and high strength up to 6000psi excellent for autoclave applications, suitable for direct contact with semiconductors. Bonds to most substrates.

 

B-46 - Very high flexibility,400% elongation with high tack for un-abraded substrates and plastic films including unetched PTFE such as TeflonTM [Teflon is a registered trademark of the Chemours company (DuPont)], excellent water and oil block for cables.

 

B-52 - Outstanding adhesive semi flexible 2 part epoxy. Provides fast assembly of dissimilar materials such as glass to acrylic. It has a fast thermal cure and long pot life.

 

B-46TH - 2 part primerless highly flexible adhesive for use on untreated dissimilar surfaces. Exhibits superior chemical resistance for submersion in oils and acid bases.

 

A-3 - adhesion promoter and primer for metals glass and ceramics. High thermal stability (250 degrees C) suitable for bonding semiconductor material with very thin bond lines.

 

A-46 - Excellent moisture seal and exterior environment protection. Operates up to 500 degrees F. Optically clear sealant for ceramic and electronic components.

 

Special order products (additional costs, and longer lead times may apply):

B-755 - Optically clear, high strength and temperatures (600 degrees F) low viscosity for adhesion, coating and potting applications. Excellent for water, fuels and oil sealing.

Sealants

Our sealant technology provides the best barrier between components and the environment. They provide outstanding moisture resistance and chemical /environmental protection between minerals and many dissimilar polymers.

A-46 - Excellent moisture seal and exterior environment protection. Operates up to 500 degrees F. Optically clear sealant for ceramic and electronic components.

 

B-45 - is a two part adhesive, flexible to 130% elongation. Tough and chemically resistant, bonds to most plastics and is excellent for electrical and electronic application.

 

B-481 - Tough and high strength up to 6000psi excellent for autoclave applications, suitable for direct contact with semiconductors. Bonds to most substrates.

 

B-482 - Semi flexible epoxy suitable for encapsulating sensitive instrumentation. Superior for coating in marine applications and other harsh environments.

 

B-4811 - High chemical resistance and strength. Outstanding moisture resistance and ruggedness .Superior for coating, priming and encapsulation in marine applications.

 

Special order products (additional costs, and longer lead times may apply):

B-45CC - Caulks and seals difficult to bond substrates and dissimilar adhesions to UHMW and acetal (Delrin).Superb in harsh chemical, marine and sub- sea environments. Cures under water.

B-755 - Optically clear, high strength and temperatures (600 degrees F) low viscosity for adhesion, coating and potting applications. Excellent for water, fuels and oil sealing.

 
Adhesive promoters

Adhesion promoters can bring extra protection, strength and adhesion/cohesion to substrates. They also help to increase bond strength, impact resistance, tensile and lap shear results.

A-3 - adhesion promoter and primer for metals glass and ceramics. High thermal stability (250 degrees C) suitable for bonding semiconductor material with very thin bond lines.

 

A-37 - Almost optically clear, high performance, high temperature, moisture resistant primer adhesive for use with dissimilar polymers: silicone, UHMW, PE, PI. Operates up to 200 degrees C.

 

A-43 - Suitable for a very wide range of plastics and vulcanizing elastomers as adhesion promoter to most substrates. Used as a primer for PU and TPU overmolding to a wide range of substrates

 

A-53 - Broad based, one part adhesion promoter and primer suitable for cationic cure coatings and adhesives. Ambient cure 60 minutes or accelerated thermal cure.

 

C-6 - Primer for PU overmolding to a wide range of substrates including polyolefin. Use as an adhesion promoter on many substrates for a wide range of vulcanizing elastomers.

 

C-24 - promotes bonding to ABS, polyesters, polyamide, acrylics and other thermoplastics, glass, ceramic and most metals.

 

C-52 - Adhesion promoter and primer for molding thermoplastics (polyethylene.) Forms cohesive bonds with HDPE and MDPE to metal in molding operations up to 600 degrees F.

 
Product Selection Guide