RELTEK is committed to providing engineering solutions through many proprietary commercially off the shelf products. We specialize in the development of new products to the specifications of our customers. We also modify existing product technology to serve emerging opportunities.
Our products offer unique properties; bonding plastics to dissimilar materials like metal, glass and ceramic. They offer superior shock resistance to thermal cycling and mechanical vibration and work within an exceptionally wide range of thermal and chemical resistance.
Just as a reminder, our technical library provides comprehensive product application, surface preparation recommendations and safety information that ensure the best product results and performance.
Epoxy Products
These two part epoxies specialize in bonding dissimilar materials and many plastics and rubbers. They excel in sea water applications and resist most solvents, alcohol, acids and alkalis.
|
B-4X Series: They handle harsh environments easily with outstanding effectiveness against moisture, salt water, acids, alkalis, oils and corrosive gases. They have an operating temperature from -50 F to +350 F. Some uses include potting and cable terminations subject to salt water.
|
|
B-4XTH Series: Combined with our epoxy resins the patented silicate blend gives them an opaque flow control with very low VOC issues. The major benefit results in a more controlled application and gravitational flow.
|
|
B-5X Series: They are a more efficient alternative to mechanical encasing. Sealants provide a barrier between the equipment and the environment. It is highly suitable for electronics applications. On cooling it transitions into a semi rigid state providing high strength, impact and shock resistance. It cures in 10 minutes at 170 F .
|
|
B-5xTH Series: Our thixotropic technology thickens the epoxy resins to a higher viscosity for better control of gravitational flow in those hard to reach areas. They have very low VOC issues. This silicate blend can also be enhanced to obtain a higher viscosity at the users request.
|
|
B-7X Series: This product series possesses low viscosity, high strength, and semi rigid characteristics. It excels in harsh environments with up to a 600 degree F temperature range and thermally cures in 10 minutes at 135 F. It is suitable for clear coat, conformal coating and electrical potting applications. |
*Most of our epoxies will require a minimum bond-line thickness of .004"-.007".
Silane Products
These silane coatings can be used in conjunction with many polymers for improved chemical, impact and environmental resistance.
|
A-X Series: Offer a wide range of capabilities for promoting moisture resistant chemical bonding between minerals and polymers. They can be used as a primer and as an adhesive and primer coat when combined with other BONDiT coatings. When used as an adhesive it provides thin bond lines (1/2 mil) in glass to glass or glass to polyethylene bonding.
|
|
C-X Series: Are an all around general purpose one part primer, adhesion promoter and adhesive. They offer a wide range of capabilities for promoting chemical bonding between coatings, sealants and adhesives. They are especially suitable for military applications and greatly increase bond strength and lap shear results.
|
RELTEK Brochure
*View the RELTEK Brochure pdf with information on the company, products, pricing, and more.
Purchasing Information
Pricing Information